MSFS - iniBuilds A300-600R
Discuss this Profile on Discord
See You Have Control for info on modding aircraft profiles.
Changelog
2025-08-17 - v2
- Reduced the duration of the long-push action to 0.5 seconds
Pilot Notes
The MobiFlight setting Automatically perform Retrigger Action with Run Mode should be disabled when using this profile. Failure to do so causes unwanted commands when the profile is Run.
ALT Knob
Push the ALT Knob to change ALT Knob units (100/1000)
Autothrottle (A/T)
A/T does not arm until the thrust levers are pushed forward. This is a feature of the A300.
TOGA
TOGA is engaged by holding the N1 THR button for 0.5 seconds. Note that the button does not illuminate, as on the real aircraft.
Profile Climb
Profile Climb (P.Climb) does not respect altitude constraints. LVL CHG is more often used. This is a feature of the A300.
CRS / ILS
CRS is blank, unless the VOR/NAV/ILS switch is in the VOR position.
ILS CRS is set on the pedestal between the two MCDUs.
BARO Knob
Pushing BARO KNOB to set STD pressure. Rotate the knob to get out of STD. Capt/FO sync can be enabled on the EFB.
V/S
V/S behaviour is slightly off, because there is no "V/S engaged" variable for us to access. To set V/S, push the V/S button then rotate the knob to unblank the display.
MINS
RADAR MINS (DH) is implemented, including the button push.
BARO MINS (MDA) is set on the MCDU and is not settable using the knob.
Autothrottle Disconnect
AT is disconnected by holding Disengage for 0.5 seconds.
