MSFS - FlightFX CitatiOn X
Discuss this Profile on Discord
See You Have Control for info on modding aircraft profiles.
Changelog
2025-12-24 - v1
Pilot Notes
The MobiFlight setting Automatically perform Retrigger Action with Run Mode should be disabled when using this profile. Failure to do so causes unwanted commands when the profile is Run.
BARO
Pushing the knob for STD resets the pressure to 29.92 / 1013 as on the real aircraft. There is no "Standard" mode per se.
Airspeed
IAS can be either FMS-derived, or manual.
In FMS-derived mode, the IAS display will be dimmed. It cannot be changed by rotating the knob.
Push the IAS knob to get into manual IAS mode. The display reverts to normal brightness. In this mode, the IAS can be adjusted by rotating the knob.
We have tried to get Mach functionality but at the moment only IAS is available from the aircraft.
Flight Director / Parking Brake
The aircraft has a single flight director.
On your hardware, F/D 2 is used for the parking brake.
EFIS Map
Both map mode butons do the same thing, i.e. push the MFD MAP button on the aircraft. This changes between MAP and PLAN mode.
In PLAN mode, push the SKP button to skip through the flight plan. See the screenshot below:
TOGA
TOGA is commanded when N1 THR is pushed for 0.5 seconds. LNAV and VNAV can be armed before flight.
Vertical Navigation
Push LVL CHG to change from VTO (VNAV Take Off) to VFLC (VNAV Flight Level Change) - engine reduces from TO to CLB.
It is normal for VNAV and FLC modes to be engaged simultaneously on the Citation X.
