MSFS - Boeing 747-8i
Discuss this Profile on Discord
See You Have Control for info on modding aircraft profiles.
Changelog
2025-10-04 - v3
- Added parking brake to FD2 (the aircraft only has FD1 modelled so these controls were spare)
- FS2024: Created a separate profile to fix the altitude knob
2025-01-31 - v2
- Added 'Std' display for Standard pressure
- Improved reliability of A/T switch (it's still a little slow - aircraft issue)
Important
The MobiFlight setting Automatically perform Retrigger Action with Run Mode should be disabled when using this profile. Failure to do so causes unwanted commands when the profile is Run.
Pilot Notes
CMD A engages AP L.
CMD B engages AP C. This can be modded to push AP R, e.g. with push-hold, as desired. Engaging APP will engage all 3 APs.
HDG control matches the physical unit (HDG SEL). HDG HOLD can be modded in if desired.
Asobo have modelled FD1 only. FD1 switch will engage both FDs.
Push CRS knob for CRS2. Push again for CRS1.
The Boeing 747 has LOC but not VOR. To fly a VOR radial, enter the station as the next FMC waypoint. Enter the INTC CRS at LSK 6R and execute. The radial is drawn on the ND. Steer towards it and engage LNAV to fly the radial.
